Cata E-100 GTH Single flow air extractor fan, Hygrostat humidity detection, Digital display (00900200)
- Product reference: SIKOAE100GTH
- EAN: 8422248049634
- Line: E-Glass
When it comes to a multi-brand pack, it is then the sum of the PPC of its components.
The E-100 GTH air extractor fan can be operated at two different speeds: continuously at a lower speed throughout the day or ventilating the room when necessary at full speed. At the initiative of the integrated humidity sensor or an external switch, the speed is increased and automatically reduced after ventilation, controlled by a microprocessor.
see detailed description- Material:Glass
- New:New
- Weight:1
- Display:Digital
- LED light:Yes
Features of the E-100 GTH Single flow air extractor fan, Hygrostat humidity detection, Digital display (00900200) :
- Adjustable humidity sensor: from 40 to 95%.
- Electronic timer adjustable from 0 to 15 minutes
- Elegant white glass front plate: 150 x 150 mm
- Display: blue LED
- Controlled temperature and current humidity (in the room)
- Permanently prevents the formation of mould
- Single flow
- Low power consumption: 4W (continuous operation), 8W (full speed)
- Ultra-quiet: 17 dB (continuous operation), 31 dB (full speed)
- Easy installation without using screws
- Degree of protection: IP44
- Flow rate: 36 m3 / h (continuous operation), 90 m3 / h (full speed)
- Power supply: 230 V / 50 Hz
- Duct diameter: 98 mm
- 1st mode: low speed for continuous extraction
- 2nd mode: starts when you turn on the light, by activating the Hygrostat or the Timer
- Non-return valve not included
- Do not place in the kitchen or toilet
- Do not place in the shower or over the bath
All models with Hygrostat also include the Timer function: they have a separate terminal for switching the fan, independent of the humidity control. After applying the phase (button, switch or thermostat) to this terminal, the fan starts. After disconnecting the phase and after the set time has elapsed, the fan switches to automatic humidity monitoring.
.
High-end design
- The suction, popular with kitchen hoods, is now also used in bathrooms (the noise from the pipes does not pass directly through the fan, but hits the front plate, where part of it bounces back and only a small part escapes to the side: a beneficial effect on noise reduction)
- Can be installed in the wall or ceiling
- Illumination by a blue LED system indicating the current temperature and relative humidity (in the given room)
Easy to clean
- No more dust clogging grilles
- Glass front plate can be easily removed by turning it upside down, washed under running water and replaced
When it comes to a multi-brand pack, it is then the sum of the PPC of its components.
(17.16% saving)